Exchange 2007 Requirement in server 2003

1.DVD OF EXCHANGE 2007

2.INSTALL SERVER 2003 ENT, STD, DATACENTER SP2

3.ENABLE SERVICE .NET FRAME WORK & WWW IN APPLICATION SERVER

4.INSTALL .NET 2.0

5.INSTALL POWER SHELL 1.0

6.INSTALL MMC 3.0

7.CREATE DOMAIN CONTROLER

8.REISE WINDOWS NETIVE MODE

9.INSTALL HOTFIX KB 933360 –X86 ENU (BECAUSE DATE & TIME SETTING’S AFTER 2007)

10.INSTALL HOTFIX (KB942084 –X86) BECAUSE THIS HOTFIX INTEGRATED WITH .NET 2.0 & CLEAR THE ISSUE OF 32 BIT OR 64BIT

11.GO TO COMMAND PROMPT

12.E.G:-CD\EXCHANGE

13.D:\EXCHANGE2007>SETUP /PREPARESCHEMA (AFTER COMPLETE PRAPARE SCHEMA YOU WILL RUN)

14.SETUP /PREPAREAD (IF CAN’T RUN SKIP THIS)

15.THEN GO TO EXCHANGE2007 DIRECTORY & LAUNCH THE SETUP.EXE FILE

Step2solutions.blogspot.in                                    Rohit Sahu

Types of Router Memory

ROM ROM is read-only memory available on a router's processor board. The initial bootstrap software that runs on a Cisco router is usually stored in ROM. ROM also maintains instructions for power-on self test (POST) diagnostics. For ROM Software upgrades, the pluggable chips on the motherboard should be replaced. Flash Memory Flash memory is an Electronically Erasable and Re-Programmable memory chip. The Flash memory contains the full Operating System Image (IOS, Internetwork Operating System). This allows you to upgrade the OS without removing chips. Flash memory retains content when router is powered down or restarted. RAM RAM is very fast memory that loses its information when the system is restarted. On a router, RAM is used to hold IOS system tables and buffers. RAM memory is basically used for all system operational storage requirements. RAM Stores routing tables, Keeps ARP cache, Performs packet buffering (shared RAM) and RAM Provides temporary memory for the router configuration file of the router while the router is powered on. NVRAM (Non-volatile Random Access Memory) NVRAM is used to store the startup configuration. This is the configuration file that IOS reads when the router boots up. It is extremely fast memory and retains its content when the router is restarted.

BLUETOOTH

Definition: Bluetooth is a specification for the use of low-power radio communications to wirelessly link phones, computers and other network devices over short distances. The name Bluetooth is borrowed from Harald Bluetooth, a king in Denmark more than 1,000 years ago.

Bluetooth technology was designed primarily to support simple wireless networking of personal consumer devices and peripherals, including cell phones, and wireless headsets. Wireless signals transmitted with Bluetooth cover short distances, typically up to 30 feet (10 meters). Bluetooth devices generally communicate at less than 1 Mbps

Bluetooth is a proprietary open wireless technology standard for exchanging data over short distances (using short-wavelength radio transmissions in the ISM band from 2400–2480 MHz) from fixed and mobile devices, creating personal area networks (PANs) with high levels of security. Created by telecoms vendor Ericsson in 1994,^[ Bluetooth is managed by the Bluetooth Special Interest Group, which has more than 15,000 member companies in the areas of telecommunication, computing, networking, and consumer electronics.

Implementation

Bluetooth uses a radio technology called frequency-hopping spread spectrum, which chops up the data being sent and transmits chunks of it on up to 79 bands (1 MHz each; centered from 2402 to 2480 MHz) in the range 2,400–2,483.5 MHz

Bluetooth vs. Wi-Fi (IEEE 802.11)

Bluetooth and Wi-Fi (the brand name for products using IEEE 802.11 standards) have some similar applications: setting up networks, printing, or transferring files. Wi-Fi is intended as a replacement for cabling for general local area network access in work areas. This category of applications is sometimes called wireless local area networks (WLAN). Bluetooth was intended for portable equipment and its applications. The category of applications is outlined as the wireless personal area network (WPAN). 

Bluetooth is a replacement for cabling in a variety of personally carried applications in any setting and can also support fixed location applications such as smart energy functionality in the home (thermostats, etc.).

Wi-Fi is a wireless version of a common wired Ethernet network, and requires configuration to set up shared resources, transmit files, and to set up audio links (for example, headsets and hands-free devices). Wi-Fi uses the same radio frequencies as Bluetooth, but with higher power, resulting in higher bit rates and better range from the base station. The nearest equivalents in Bluetooth are the DUN profile, which allows devices to act as modem interfaces, and the PAN profile, which allows for ad-hoc networking

Communication and connection

A master Bluetooth device can communicate with a maximum of seven devices in a piconet (an ad-hoc computer network using Bluetooth technology), though not all devices support this limit. The devices can switch roles, by agreement, and the slave can become the master (for example, a headset initiating a connection to a phone will necessarily begin as master, as initiator of the connection; but may subsequently prefer to be slave).

The Bluetooth Core Specification provides for the connection of two or more piconets to form a scatternet, in which certain devices simultaneously play the master role in one piconet and the slave role in another.

Specifications and features

The Bluetooth specification was developed as a cable replacement in 1994 by Jaap Haartsen and Sven Mattisson, who were working forEricsson in Sweden.^[25] The specification is based on frequency-hopping spread spectrum technology.

The specifications were formalized by the Bluetooth Special Interest Group (SIG). The SIG was formally announced on May 20, 1998. Today it has a membership of over 14,000 companies worldwide. It was established by Ericsson, IBM, Intel, Toshiba and Nokia, and later joined by many other companies.

All versions of the Bluetooth standards are designed for downward compatibility. That lets the latest standard cover all older versions

piconet

A network of devices connected in an ad hoc fashion using Bluetoothtechnology. A piconet is formed when at least two devices, such as a portable PC and a cellular phone, connect. A piconet can support up to eight devices. When a piconet is formed, one device acts as the master while the others act as slaves for the duration of the piconet connection. A piconet is sometimes called a PAN.

"Piconet" is a combination of the prefix "pico," meaning very small or one trillionth, and network.

Adopted protocols

Adopted protocols are defined by other standards-making organizations and incorporated into Bluetooth’s protocol stack, allowing Bluetooth to create protocols only when necessary. The adopted protocols include:

Point-to-Point Protocol (PPP)

Internet standard protocol for transporting IP datagrams over a point-to-point link.

TCP/IP/UDP

Foundation Protocols for TCP/IP protocol suite

Object Exchange Protocol (OBEX)

Session-layer protocol for the exchange of objects, providing a model for object and operation representation

Wireless Application Environment/Wireless Application Protocol (WAE/WAP)

WAE specifies an application framework for wireless devices and WAP is an open standard to provide mobile users access to telephony and information services.

Comparison between Wifi and Bluetooth

The hardware requirements of WiFi and Bluetooth are entirely different, Through Bluetooth adapter you can connect devices with each other. While in WiFi network you need an adapter, router and access point to enable connection. The bandwidth required for Bluetooth is only 800 kbps and for WiFi 11Mbps bandwidth require. WiFi network come into existence in 1991 and Bluetooth in 1994.The specification of Bluetooth is SIG and wifi is IEEE, and WECA.

The specification of Bluetooth are a lot as the usage is very simple and various devices can be connected at a time .You can also switch between devices via Bluetooth. In other hand WiFi network is a complex network and hard to configure. You can use various devices with Bluetooth such as automation devices, mobile phones, keyboard, and mouse. While in WiFi network server, desktop, and notebook computer can be used. The rising issue of wifi and Bluetooth is the range because the range of Bluetooth is 10 meters and as compared to Bluetooth WiFi offering 100 meters range for user to make it more beneficial for user.

MO DISK (WHAT IS MO DISK)

A magneto-optical drive is a kind of optical disc drive capable of writing and rewriting data upon a magneto-optical disc Initially the drives were 130 mm and had the size of full-height 130 mm hard-drives (like in IBM PC XT). 130 mm media looks similar to a CD-ROM enclosed in an old-style caddy, while 90 mm media is about the size of a regular 1.44MB floppy disk, but twice the thickness. The cases provide dust resistance, and the drives themselves have slots constructed in such a way that they always appear to be closed. Originally, MO discs were WORM (write once, read many) drives, but later read/write MO drives became available. The 130mm drives were available in capacities from 650MB to 9.2GB. However, this was split in halves per the sides of the disk. The 2.6GB disks, for example, had a formatted capacity of 1.2GB per side. The 130mm drives were always SCSI. The 90mm discs had their entire capacity on one side with no capability to flip them over. The 90mm drives were available in SCSI, IDE, and USB formats. Capacities ranged from 128MB to 2.3GB